Find a Service Center
- 2.63 in Shaft Diameter
- 3.62 in Housing Bore Diameter
- 0.44 in Overall Width
- Fluoro Rubber (FKM) Lip Material
- Inch
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Case Construction | Steel Case w/Inner Case |
| Operating Temperature [Max] | 390 °F |
| Housing Bore Dia. | 3.623 in |
| Solid | Yes |
| Lip Style | Internal |
| Temperature Range [Max] | 400 °F |
| Design | CRWH1 |
| Cover/Compensation Ring/Plate Required | No |
| Lip Type | Single Lip |
| Case Design | Metal Case, Inner Case |
| Seal Type | Oil |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Lubricant | Oil or Grease |
| Operating Temperature [Min] | -5 °F |
| Spring Material | Carbon Steel |
| Seal Application | General Purpose |
| Bore Sealant | Bore Tite |
| Lip Material | Fluorocarbon Rubber (FKM) |
| Speed | 0.07 ft/min |
| Spring Type | Garter |
| Installation | Housing Press Fit |
| Shaft Dia. | 2.625 in |
| Pressure | 10 psi |
| Temperature Range [Min] | -40 °F |
| Case Material | Steel |
| Seal Design | SKF Wave |
| Inch/Metric | Inch |
| Overall Width | 0.438 in |
| Construction | CRWH1 |
| Surface Speed [Nom] | 3,600 ft/min |
| Weight | 0.323 LB |
| EAN or UPC | 85311027809 |
