Find a Service Center
Alternate Products
- 3 in Shaft Diameter
- 5 in Housing Bore Diameter
- 11 mm Overall Width
- Nitrile Rubber (NBR) Lip Material
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Lip Style | Internal |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Operating Temperature [Min] | -40 °F |
| Overall Width | 0.438 in |
| Installation | Housing Press Fit |
| Pressure | 10 psi |
| Construction | CRWH1 |
| Speed | 0.07 ft/min |
| Design | CRWH1 |
| Seal Design | SKF Wave |
| Lip Material | Nitrile Rubber (NBR) |
| Lip Type | Single Lip |
| Seal Application | General Purpose |
| Temperature Range [Max] | 225 °F |
| Case Construction | Steel Case w/Inner Case |
| Cover/Compensation Ring/Plate Required | No |
| Surface Speed [Nom] | 3,600 ft/min |
| Lubricant | Oil or Grease |
| Housing Bore Dia. | 5.251 in |
| Solid | Yes |
| Shaft Dia. | 3.125 in |
| Seal Type | Oil |
| Operating Temperature [Max] | 210 °F |
| Spring Material | Carbon Steel Garter |
| Temperature Range [Min] | -40 °F |
| Inch/Metric | Inch |
| Case Design | Metal Case, Inner Case |
| Weight | 0.493 LB |
| EAN or UPC | 85311030717 |
