Find a Service Center
- Radial Shaft Seal
- 32 mm Shaft Diameter
- 60 mm Housing Bore Diameter
- 8 mm Width
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. The seals have an outer covering of steel or elastomer, designed to fit the housing bore. The sealing lip is made of elastomer or thermoplastic for best sealing against the rotating shaft. A garter spring in the seal optimizes the sealing against the shaft.
features
- Many variants
- Easy installation
| Temperature Range [Min] | -40 °F |
| Shaft Dia. | 32 mm |
| Seal Application | Light Dirt Exclusion |
| Inch/Metric | Metric |
| Lip Style | Internal |
| Lip Material | Nitrile Rubber (NBR) |
| Overall Width | 8 mm |
| Construction | HMSA7 |
| Lip Type | Dual Lip w/One Spring |
| Case Construction | Rubber Covered Steel Case |
| Spring Material | Carbon Steel Garter |
| Surface Speed [Nom] | 3,600 ft/min |
| Pressure | 10 psi |
| Temperature Range [Max] | 250 °F |
| Seal Design | Standard |
| Housing Bore Dia. | 60 mm |
| Seal Type | Grease |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Weight | 0.102 LB |
| EAN or UPC | 85311237475 |
