Find a Service Center
Alternate Products
- 3.38 in Shaft Diameter
- 5 in Housing Bore Diameter
- 0.44 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- Inch
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Pressure | 10 psi |
| Housing Bore Dia. | 4.999 in |
| Operating Temperature [Max] | 210 °F |
| Construction | CRWH1 |
| Installation | Housing Press Fit |
| Overall Width | 0.438 in |
| Case Design | Metal Case, Inner Case |
| Inch/Metric | Inch |
| Seal Application | General Purpose |
| Temperature Range [Min] | -40 °F |
| Speed | 0.07 ft/min |
| Solid | Yes |
| Operating Temperature [Min] | -40 °F |
| Spring Type | Garter |
| Seal Design | SKF Wave |
| Shaft Dia. | 3.375 in |
| Lubricant | Oil or Grease |
| Design | CRWH1 |
| Cover/Compensation Ring/Plate Required | No |
| Lip Style | Internal |
| Surface Speed [Nom] | 3,600 ft/min |
| Lip Type | Single Lip |
| Lip Material | Nitrile Rubber (NBR) |
| Case Material | Steel |
| Spring Material | Carbon Steel |
| Seal Type | Oil |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Case Construction | Steel Case w/Inner Case |
| Temperature Range [Max] | 225 °F |
| Weight | 0.486 LB |
| EAN or UPC | 85311031844 |
