Find a Service Center
Alternate Products
- 3.44 in Shaft Diameter
- 5 in Housing Bore Diameter
- 0.44 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- Inch
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Case Construction | Steel Case w/Inner Case |
| Shaft Dia. | 3.438 in |
| Overall Width | 0.438 in |
| Spring Material | Carbon Steel |
| Pressure | 10 psi |
| Construction | CRWH1 |
| Lip Type | Single Lip |
| Speed | 0.07 ft/min |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Bore Sealant | Bore Tite |
| Lubricant | Oil or Grease |
| Design | CRWH1 |
| Temperature Range [Max] | 225 °F |
| Spring Type | Garter |
| Lip Style | Internal |
| Lip Material | Nitrile Rubber (NBR) |
| Operating Temperature [Min] | -40 °F |
| Cover/Compensation Ring/Plate Required | No |
| Seal Design | SKF Wave |
| Housing Bore Dia. | 4.999 in |
| Case Design | Metal Case, Inner Case |
| Surface Speed [Nom] | 3,600 ft/min |
| Seal Application | General Purpose |
| Operating Temperature [Max] | 210 °F |
| Solid | Yes |
| Inch/Metric | Inch |
| Seal Type | Oil |
| Temperature Range [Min] | -40 °F |
| Installation | Housing Press Fit |
| Case Material | Steel |
| Weight | 0.562 LB |
| EAN or UPC | 85311032001 |
