Find a Service Center
Alternate Products
- 3.625 in Shaft Diameter
- 4.501 in Housing Bore
- 0.375 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Housing Bore Dia. | 4.501 in |
| Overall Width | 0.375 in |
| Design | CRW1 |
| Inch/Metric | Inch |
| Operating Temperature [Max] | 210 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Shaft Dia. | 3.625 in |
| Construction | CRW1 |
| Case Construction | Steel Case w/o Inner Case |
| Lip Type | Single Lip |
| Pressure | 10 psi |
| Solid | Yes |
| Spring Material | Carbon Steel Garter |
| Lip Material | Nitrile Rubber (NBR) |
| Lip Style | Internal |
| Temperature Range [Max] | 225 °F |
| Speed | 0.07 ft/min |
| Installation | Housing Press Fit |
| Seal Type | Oil |
| Temperature Range [Min] | -65 °F |
| Surface Speed [Nom] | 3,600 ft/min |
| Operating Temperature [Min] | -40 °F |
| Seal Design | SKF Wave |
| Cover/Compensation Ring/Plate Required | No |
| Seal Application | General Purpose |
| Case Design | Metal Case |
| Lubricant | Oil or Grease |
| Weight | 0.8 LB |
| EAN or UPC | 85311032919 |
