Find a Service Center
- 3 in Shaft Diameter
- 4 in Housing Bore Diameter
- 9 mm Overall Width
- Fluoro Rubber (FKM) Lip Material
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. The seals have an outer covering of steel or elastomer, designed to fit the housing bore. The sealing lip is made of elastomer or thermoplastic for best sealing against the rotating shaft. A garter spring in the seal optimizes the sealing against the shaft.
features
- Many variants
- Easy installation
| Surface Speed [Nom] | 3,600 ft/min |
| Spring Material | Carbon Steel Garter |
| Lubricant | Oil or Grease |
| Shaft Dia. | 3 in, 95 mm |
| Case Design | Rubber Outside Diameter |
| Inch/Metric | Metric |
| Seal Design | Molded Design |
| Operating Temperature [Max] | 390 °F |
| Design | HMS4 |
| Pressure | 7 psi |
| Case Construction | Rubber Covered Steel Case |
| Installation | Housing Press Fit |
| Lip Style | Internal |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@1000-3600 |
| Lip Type | Single Lip |
| Seal Application | General Purpose |
| Housing Bore Dia. | 4 in, 114 mm |
| Speed | 0.05 ft/min |
| Cover/Compensation Ring/Plate Required | No |
| Overall Width | 9 mm |
| Construction | HMS4 |
| Operating Temperature [Min] | -5 °F |
| Temperature Range [Max] | 400 °F |
| Lip Material | Fluoro Rubber (FKM) |
| Temperature Range [Min] | -40 °F |
| Weight | 0.254 LB |
| EAN or UPC | 85311033428 |
