Find a Service Center
Alternate Products
- 0.375 in Shaft Diameter
- 0.999 in Housing Bore
- 0.25 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Surface Speed [Nom] | 442 ft/min |
| Inch/Metric | Inch |
| Case Construction | Steel Case w/o Inner Case |
| Lubricant | Oil or Grease |
| Case Design | Metal Case |
| Shaft Dia. | 0.375 in |
| Construction | CRW1 |
| Overall Width | 0.25 in |
| Operating Temperature [Max] | 210 °F |
| Solid | Yes |
| Lip Material | Nitrile Rubber (NBR) |
| Cover/Compensation Ring/Plate Required | No |
| Pressure | 10 psi |
| Operating Temperature [Min] | -40 °F |
| Seal Design | SKF Wave |
| Temperature Range [Max] | 225 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Seal Application | General Purpose |
| Seal Type | Oil |
| Temperature Range [Min] | -65 °F |
| Installation | Housing Press Fit |
| Speed | 0.07 ft/min |
| Lip Style | Internal |
| Design | CRW1 |
| Housing Bore Dia. | 0.999 in |
| Spring Material | Carbon Steel Garter |
| Lip Type | Single Lip |
| Weight | 0.063 LB |
| EAN or UPC | 85311002806 |
