Find a Service Center
- Radial Shaft Seal
- 37 mm Shaft Diameter
- 52 mm Housing Bore Diameter
- 8 mm Width
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. The seals have an outer covering of steel or elastomer, designed to fit the housing bore. The sealing lip is made of elastomer or thermoplastic for best sealing against the rotating shaft. A garter spring in the seal optimizes the sealing against the shaft.
features
- Many variants
- Easy installation
| Cover/Compensation Ring/Plate Required | No |
| Case Construction | Rubber Covered Steel Case |
| Overall Width | 8 mm |
| Seal Application | General Purpose |
| Seal Type | Grease |
| Construction | HMS4 |
| Lip Style | Internal |
| Seal Design | Standard |
| Inch/Metric | Metric |
| Shaft Dia. | 37 mm |
| Housing Bore Dia. | 52 mm |
| Temperature Range [Min] | -22 °F |
| Spring Material | Carbon Steel Garter |
| Lip Material | Nitrile Rubber (NBR) |
| Temperature Range [Max] | 230 °F |
| Lip Type | Single Lip w/Spring |
| Pressure | 10 psi |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@1000-3600 |
| Weight | 0.091 LB |
| EAN or UPC | 85311154857 |
