Find a Service Center
- 3 in Shaft Diameter
- 5 in Housing Bore Diameter
- 1 in Overall Width
- Nitrile Rubber (NBR) Lip Material
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. The seals have an outer covering of steel or elastomer, designed to fit the housing bore. The sealing lip is made of elastomer or thermoplastic for best sealing against the rotating shaft. A garter spring in the seal optimizes the sealing against the shaft.
features
- Many variants
- Easy installation
| Lip Material | Nitrile Rubber (NBR) |
| Pressure | 10 psi |
| Overall Width | 1 in, 26 mm |
| Design | HMSA8 |
| Case Construction | Steel Case w/Inner Case |
| Construction | HMSA8 |
| Temperature Range [Max] | 250 °F |
| Lip Type | Dual Lip w/One Spring |
| Installation | Housing Press Fit |
| Housing Bore Dia. | 5 in, 145 mm |
| Cover/Compensation Ring/Plate Required | No |
| Surface Speed [Nom] | 3,600 ft/min |
| Lubricant | Oil or Grease |
| Seal Design | Assembled Design |
| Spring Material | Carbon Steel Garter |
| Seal Application | Light Dirt Exclusion |
| Operating Temperature [Max] | 210 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Inch/Metric | Metric |
| Shaft Dia. | 3 in, 100 mm |
| Operating Temperature [Min] | -40 °F |
| Temperature Range [Min] | -40 °F |
| Lip Style | Internal |
| Weight | 1.011 LB |
| EAN or UPC | 85311885188 |
