Find a Service Center
Alternate Products
- 4 in Shaft Diameter
- 6 in Housing Bore Diameter
- 0.5 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- Inch
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Case Construction | Steel Case w/Inner Case |
| Construction | CRWH1 |
| Temperature Range [Max] | 225 °F |
| Case Material | Steel |
| Speed | 0.07 ft/min |
| Design | CRWH1 |
| Seal Application | General Purpose |
| Solid | Yes |
| Surface Speed [Nom] | 3,600 ft/min |
| Bore Sealant | Bore Tite |
| Temperature Range [Min] | -40 °F |
| Inch/Metric | Inch |
| Operating Temperature [Max] | 210 °F |
| Cover/Compensation Ring/Plate Required | No |
| Lip Type | Single Lip |
| Lip Style | Internal |
| Lip Material | Nitrile Rubber (NBR) |
| Operating Temperature [Min] | -40 °F |
| Case Design | Metal Case, Inner Case |
| Seal Type | Oil |
| Lubricant | Oil or Grease |
| Overall Width | 0.5 in |
| Pressure | 10 psi |
| Shaft Dia. | 4 in |
| Installation | Housing Press Fit |
| Seal Design | SKF Wave |
| Spring Type | Garter |
| Housing Bore Dia. | 6.001 in |
| Spring Material | Carbon Steel |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Weight | 0.6 LB |
| EAN or UPC | 85311034623 |
