Find a Service Center
Alternate Products
- 4.13 in Shaft Diameter
- 5.13 in Housing Bore Diameter
- 0.44 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- Inch
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Speed | 0.07 ft/min |
| Case Material | Steel |
| Lip Style | Internal |
| Solid | Yes |
| Spring Material | Carbon Steel |
| Operating Temperature [Max] | 210 °F |
| Spring Type | Garter |
| Inch/Metric | Inch |
| Lip Material | Nitrile Rubber (NBR) |
| Construction | CRWH1 |
| Design | CRWH1 |
| Temperature Range [Min] | -40 °F |
| Surface Speed [Nom] | 3,600 ft/min |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Seal Application | General Purpose |
| Case Design | Metal Case, Inner Case |
| Lubricant | Oil or Grease |
| Lip Type | Single Lip |
| Seal Type | Oil |
| Operating Temperature [Min] | -40 °F |
| Overall Width | 0.438 in |
| Shaft Dia. | 4.125 in |
| Installation | Housing Press Fit |
| Temperature Range [Max] | 225 °F |
| Case Construction | Steel Case w/Inner Case |
| Pressure | 10 psi |
| Seal Design | SKF Wave |
| Housing Bore Dia. | 5.126 in |
| Cover/Compensation Ring/Plate Required | No |
| Bore Sealant | Bore Tite |
| Weight | 0.343 LB |
| EAN or UPC | 85311034760 |
