Find a Service Center
- 4.13 in Shaft Diameter
- 5.25 in Housing Bore Diameter
- 0.44 in Overall Width
- Fluoro Rubber (FKM) Lip Material
- Inch
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Surface Speed [Nom] | 3,600 ft/min |
| Solid | Yes |
| Pressure | 10 psi |
| Lubricant | Oil or Grease |
| Case Design | Metal Case, Inner Case |
| Overall Width | 0.438 in |
| Seal Type | Oil |
| Case Construction | Steel Case w/Inner Case |
| Lip Type | Single Lip |
| Spring Material | Carbon Steel |
| Lip Material | Fluorocarbon Rubber (FKM) |
| Temperature Range [Max] | 400 °F |
| Shaft Dia. | 4.125 in |
| Seal Application | General Purpose |
| Installation | Housing Press Fit |
| Spring Type | Garter |
| Cover/Compensation Ring/Plate Required | No |
| Inch/Metric | Inch |
| Bore Sealant | Bore Tite |
| Seal Design | SKF Wave |
| Design | CRWH1 |
| Housing Bore Dia. | 5.251 in |
| Case Material | Steel |
| Lip Style | Internal |
| Construction | CRWH1 |
| Operating Temperature [Min] | -5 °F |
| Temperature Range [Min] | -40 °F |
| Speed | 0.07 ft/min |
| Operating Temperature [Max] | 390 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Weight | 0.523 LB |
| EAN or UPC | 85311034791 |
