Find a Service Center
Alternate Products
- 4.13 in Shaft Diameter
- 5.75 in Housing Bore Diameter
- 0.44 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- Inch
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Temperature Range [Max] | 225 °F |
| Lubricant | Oil or Grease |
| Solid | Yes |
| Operating Temperature [Max] | 210 °F |
| Construction | CRWH1 |
| Spring Material | Carbon Steel |
| Bore Sealant | Bore Tite |
| Lip Type | Single Lip |
| Spring Type | Garter |
| Inch/Metric | Inch |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Pressure | 10 psi |
| Cover/Compensation Ring/Plate Required | No |
| Surface Speed [Nom] | 3,600 ft/min |
| Housing Bore Dia. | 5.751 in |
| Operating Temperature [Min] | -40 °F |
| Case Design | Metal Case, Inner Case |
| Shaft Dia. | 4.125 in |
| Seal Type | Oil |
| Seal Application | General Purpose |
| Lip Material | Nitrile Rubber (NBR) |
| Speed | 0.07 ft/min |
| Lip Style | Internal |
| Seal Design | SKF Wave |
| Temperature Range [Min] | -40 °F |
| Installation | Housing Press Fit |
| Design | CRWH1 |
| Overall Width | 0.438 in |
| Case Material | Steel |
| Case Construction | Steel Case w/Inner Case |
| Weight | 0.473 LB |
| EAN or UPC | 85311034821 |
