Find a Service Center
Alternate Products
- 4.25 in Shaft Diameter
- 6 in Housing Bore Diameter
- 0.5 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- Inch
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Seal Design | SKF Wave |
| Cover/Compensation Ring/Plate Required | No |
| Case Design | Metal Case, Inner Case |
| Inch/Metric | Inch |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Lip Style | Internal |
| Installation | Housing Press Fit |
| Pressure | 10 psi |
| Temperature Range [Min] | -40 °F |
| Overall Width | 0.5 in |
| Spring Material | Carbon Steel |
| Lubricant | Oil or Grease |
| Operating Temperature [Max] | 210 °F |
| Case Material | Steel |
| Operating Temperature [Min] | -40 °F |
| Construction | CRWH1 |
| Surface Speed [Nom] | 3,600 ft/min |
| Housing Bore Dia. | 6.001 in |
| Seal Application | General Purpose |
| Lip Type | Single Lip |
| Seal Type | Oil |
| Spring Type | Garter |
| Speed | 0.07 ft/min |
| Temperature Range [Max] | 225 °F |
| Bore Sealant | Bore Tite |
| Design | CRWH1 |
| Lip Material | Nitrile Rubber (NBR) |
| Solid | Yes |
| Case Construction | Steel Case w/Inner Case |
| Shaft Dia. | 4.25 in |
| Weight | 0.588 LB |
| EAN or UPC | 85311035200 |
