Find a Service Center
Alternate Products
- 4 in Shaft Diameter
- 6 in Housing Bore Diameter
- 12 mm Overall Width
- Nitrile Rubber (NBR) Lip Material
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Seal Design | SKF Wave |
| Case Design | Metal Case, Inner Case |
| Seal Application | General Purpose |
| Lip Style | Internal |
| Operating Temperature [Max] | 210 °F |
| Housing Bore Dia. | 6.126 in |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Construction | CRWH1 |
| Design | CRWH1 |
| Temperature Range [Max] | 225 °F |
| Speed | 0.07 ft/min |
| Overall Width | 0.5 in |
| Case Construction | Steel Case w/Inner Case |
| Operating Temperature [Min] | -40 °F |
| Surface Speed [Nom] | 3,600 ft/min |
| Cover/Compensation Ring/Plate Required | No |
| Shaft Dia. | 4.25 in |
| Lubricant | Oil or Grease |
| Lip Material | Nitrile Rubber (NBR) |
| Solid | Yes |
| Seal Type | Oil |
| Temperature Range [Min] | -40 °F |
| Inch/Metric | Inch |
| Installation | Housing Press Fit |
| Spring Material | Carbon Steel Garter |
| Pressure | 10 psi |
| Lip Type | Single Lip |
| Weight | 0.623 LB |
| EAN or UPC | 85311035262 |
