Find a Service Center
Alternate Products
- 4.38 in Shaft Diameter
- 6 in Housing Bore Diameter
- 0.5 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- Inch
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Design | CRWH1 |
| Pressure | 10 psi |
| Operating Temperature [Min] | -40 °F |
| Temperature Range [Min] | -40 °F |
| Operating Temperature [Max] | 210 °F |
| Case Design | Metal Case, Inner Case |
| Seal Design | SKF Wave |
| Cover/Compensation Ring/Plate Required | No |
| Bore Sealant | Bore Tite |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Lip Type | Single Lip |
| Shaft Dia. | 4.375 in |
| Lip Style | Internal |
| Surface Speed [Nom] | 3,600 ft/min |
| Overall Width | 0.5 in |
| Solid | Yes |
| Spring Material | Carbon Steel |
| Lip Material | Nitrile Rubber (NBR) |
| Case Material | Steel |
| Seal Type | Oil |
| Housing Bore Dia. | 6.001 in |
| Construction | CRWH1 |
| Lubricant | Oil or Grease |
| Seal Application | General Purpose |
| Spring Type | Garter |
| Installation | Housing Press Fit |
| Temperature Range [Max] | 225 °F |
| Inch/Metric | Inch |
| Speed | 0.07 ft/min |
| Case Construction | Steel Case w/Inner Case |
| Weight | 0.523 LB |
| EAN or UPC | 85311035583 |
