Find a Service Center
Alternate Products
- 4.38 in Shaft Diameter
- 5.37 in Housing Bore Diameter
- 0.57 in Overall Width
- Fluoro Rubber (FKM) Lip Material
- Inch
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. The seals have an outer covering of steel or elastomer, designed to fit the housing bore. The sealing lip is made of elastomer or thermoplastic for best sealing against the rotating shaft. A garter spring in the seal optimizes the sealing against the shaft.
features
- Many variants
- Easy installation
| Speed | 0.02 ft/min |
| Installation | Shaft Press Fit |
| Cover/Compensation Ring/Plate Required | No |
| Lip Material | Fluoro Rubber (FKM) |
| Pressure | 3 psi |
| Lip Type | Single Lip |
| Inch/Metric | Inch |
| Lubricant | Grease |
| Temperature Range [Min] | -40 °F |
| Shaft Dia. | 4.38 in, 111.13 mm |
| Overall Width | 0.57 in, 14.48 mm |
| Operating Temperature [Min] | -5 °F |
| Case Design | Metal Case, Inner Case |
| Case Material | Steel |
| Housing Bore Dia. | 5.37 in, 136.47 mm |
| Operating Temperature [Max] | 390 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.005@2000 |
| Design | X1 |
| Spring Material | Carbon Steel |
| Spring Type | Garter |
| Temperature Range [Max] | 300 °F |
| Construction | X1 |
| Seal Design | Molded Design |
| Lip Style | External |
| Case Construction | Steel Case w/Inner Case |
| Seal Application | Dirt Exclusion and Fluid Retention |
| Weight | 0.598 LB |
| EAN or UPC | 85311035729 |
