Find a Service Center
Alternate Products
- 4 in Shaft Diameter
- 5 in Housing Bore Diameter
- 12 mm Overall Width
- Nitrile Rubber (NBR) Lip Material
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Inch/Metric | Inch |
| Operating Temperature [Max] | 210 °F |
| Case Design | Metal Case, Inner Case |
| Construction | CRWH1 |
| Design | CRWH1 |
| Lubricant | Oil or Grease |
| Overall Width | 0.5 in |
| Lip Style | Internal |
| Housing Bore Dia. | 5.501 in |
| Pressure | 10 psi |
| Installation | Housing Press Fit |
| Operating Temperature [Min] | -40 °F |
| Seal Type | Oil |
| Seal Design | SKF Wave |
| Seal Application | General Purpose |
| Temperature Range [Min] | -40 °F |
| Lip Material | Nitrile Rubber (NBR) |
| Solid | Yes |
| Lip Type | Single Lip |
| Case Construction | Steel Case w/Inner Case |
| Cover/Compensation Ring/Plate Required | No |
| Shaft Dia. | 4.438 in |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Spring Material | Carbon Steel Garter |
| Temperature Range [Max] | 225 °F |
| Speed | 0.07 ft/min |
| Weight | 0.536 LB |
| EAN or UPC | 85311035736 |
