Find a Service Center
Alternate Products
- 4 1/2 in Shaft Diameter
- 5.376 in Housing Bore Diameter
- 0.438 in Overall Width
- Nitrile Rubber (NBR) Lip Material
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Lip Material | Nitrile Rubber (NBR) |
| Pressure | 10 psi |
| Seal Application | General Purpose |
| Cover/Compensation Ring/Plate Required | No |
| Lip Type | Single Lip |
| Housing Bore Dia. | 5.376 in |
| Spring Material | Carbon Steel Garter |
| Design | CRWH1 |
| Lip Style | Internal |
| Lubricant | Oil or Grease |
| Temperature Range [Max] | 225 °F |
| Operating Temperature [Min] | -40 °F |
| Surface Speed [Nom] | 3,600 ft/min |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Seal Type | Oil |
| Solid | Yes |
| Shaft Dia. | 4.5 in |
| Speed | 0.07 ft/min |
| Operating Temperature [Max] | 210 °F |
| Inch/Metric | Inch |
| Overall Width | 0.438 in |
| Case Design | Metal Case, Inner Case |
| Construction | CRWH1 |
| Case Construction | Steel Case w/Inner Case |
| Installation | Housing Press Fit |
| Temperature Range [Min] | -40 °F |
| Seal Design | SKF Wave |
| Weight | 0.328 LB |
| EAN or UPC | 85311035866 |
