Find a Service Center
- 4.688 in Shaft Diameter
- 6.001 in Housing Bore
- 0.266 in Overall Width
- Polyacrylate Elastomer (ACM) Lip Material
- Grease Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. The seals have an outer covering of steel or elastomer, designed to fit the housing bore. The sealing lip is made of elastomer or thermoplastic for best sealing against the rotating shaft. A garter spring in the seal optimizes the sealing against the shaft.
features
- Many variants
- Easy installation
| Pressure | 3 psi |
| Temperature Range [Max] | 300 °F |
| Inch/Metric | Inch |
| Lip Type | Single Lip |
| Seal Application | Dirt Exclusion And Grease Retention At Slower Speeds |
| Case Design | Metal Case |
| Pressure [Max] | 3 psi |
| Seal Type | Grease |
| Temperature Range [Min] | -40 °F |
| Lip Style | Internal |
| Cover/Compensation Ring/Plate Required | No |
| Surface Speed [Nom] | 2,000 ft/min |
| Overall Width | 0.266 in |
| Speed | 0.02 ft/min |
| Spring Material | None |
| Construction | HD1 |
| Seal Design | Grease Seal |
| Design | HD1 |
| Operating Temperature [Max] | 302 °F |
| Solid | Yes |
| Lubricant | Grease |
| Shaft Dia. | 4.688 in |
| Installation | Housing Press Fit |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.010@500, 0.005@2000 |
| Lip Material | Polyacrylate Elastomer (ACM) |
| Housing Bore Dia. | 6.001 in |
| Case Construction | Steel Case w/Inner Case |
| Operating Temperature [Min] | -40 °F |
| Weight | 0.6 LB |
| EAN or UPC | 85311036474 |
