Find a Service Center
- 4.75 in Shaft Diameter
- 5.749 in Housing Bore
- 0.438 in Overall Width
- Polyacrylate Elastomer (ACM) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Seal Application | General Purpose |
| Solid | Yes |
| Construction | CRW1 |
| Installation | Housing Press Fit |
| Cover/Compensation Ring/Plate Required | No |
| Housing Bore Dia. | 5.749 in |
| Case Design | Metal Case |
| Case Construction | Steel Case w/o Inner Case |
| Lip Material | Polyacrylate Elastomer (ACM) |
| Temperature Range [Min] | -40 °F |
| Surface Speed [Nom] | 3,600 ft/min |
| Shaft Dia. | 4.75 in |
| Pressure | 10 psi |
| Temperature Range [Max] | 300 °F |
| Operating Temperature [Min] | -40 °F |
| Lip Style | Internal |
| Speed | 0.07 ft/min |
| Inch/Metric | Inch |
| Seal Type | Oil |
| Overall Width | 0.438 in |
| Seal Design | SKF Wave |
| Lip Type | Single Lip |
| Lubricant | Oil or Grease |
| Spring Material | Carbon Steel Garter |
| Operating Temperature [Max] | 302 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Design | CRW1 |
| Weight | 0.426 LB |
| EAN or UPC | 85311036573 |
