Find a Service Center
- 0.5 in Shaft Diameter
- 0.69 in Housing Bore Diameter
- 0.17 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- Inch
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. The seals have an outer covering of steel or elastomer, designed to fit the housing bore. The sealing lip is made of elastomer or thermoplastic for best sealing against the rotating shaft. A garter spring in the seal optimizes the sealing against the shaft.
features
- Many variants
- Easy installation
| Pressure | 7 psi |
| Seal Application | General Purpose |
| Lubricant | Oil or Grease |
| Inch/Metric | Inch |
| Lip Type | Single Lip |
| Operating Temperature [Max] | 210 °F |
| Temperature Range [Min] | -40 °F |
| Lip Material | Nitrile Rubber (NBR) |
| Case Construction | Rubber Covered Steel Case |
| Shaft Dia. | 0.5 in, 12.7 mm |
| Housing Bore Dia. | 0.69 in, 17.48 mm |
| Lip Style | Internal |
| Spring Type | Garter |
| Overall Width | 0.17 in, 4.32 mm |
| Case Design | Metal Case |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Cover/Compensation Ring/Plate Required | No |
| Installation | Housing Press Fit |
| Case Material | Steel |
| Spring Material | Carbon Steel |
| Temperature Range [Max] | 225 °F |
| Solid | Yes |
| Construction | HMS1 |
| Operating Temperature [Min] | -40 °F |
| Design | HMS1 |
| Speed | 0.05 ft/min |
| Seal Design | Bonded Design |
| Surface Speed [Nom] | 3,600 ft/min |
| Weight | 0.055 LB |
| EAN or UPC | 85311003254 |
