Find a Service Center
- 5.000 in Shaft Diameter
- 5.751 in Housing Bore Diameter
- 0.500 in Overall Width
- Fluoro Rubber (FKM) Lip Material
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. The seals have an outer covering of steel or elastomer, designed to fit the housing bore. The sealing lip is made of elastomer or thermoplastic for best sealing against the rotating shaft. A garter spring in the seal optimizes the sealing against the shaft.
features
- Many variants
- Easy installation
| Temperature Range [Max] | 400 °F |
| Installation | Housing Press Fit |
| Lip Style | Internal |
| Case Design | Metal Case |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Case Construction | Rubber Covered Steel Case |
| Temperature Range [Min] | -40 °F |
| Lip Type | Single Lip |
| Operating Temperature [Min] | -5 °F |
| Seal Design | Bonded Design |
| Seal Application | General Purpose |
| Speed | 0.05 ft/min |
| Operating Temperature [Max] | 390 °F |
| Housing Bore Dia. | 5 in, 146 mm |
| Inch/Metric | Metric |
| Design | HMS1 |
| Shaft Dia. | 5 in, 127 mm |
| Overall Width | 12 mm |
| Pressure | 7 psi |
| Solid | Yes |
| Cover/Compensation Ring/Plate Required | No |
| Lubricant | Oil or Grease |
| Lip Material | Fluoro Rubber (FKM) |
| Spring Material | Stainless Steel Garter |
| Construction | HMS1 |
| Weight | 0.328 LB |
| EAN or UPC | 85311037242 |
