Find a Service Center
- 5 in Shaft Diameter
- 6 in Housing Bore Diameter
- 12 mm Overall Width
- Polyacrylate Elastomer (ACM) Lip Material
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Operating Temperature [Min] | -40 °F |
| Case Construction | Steel Case w/Inner Case |
| Shaft Dia. | 5 in |
| Inch/Metric | Inch |
| Temperature Range [Max] | 300 °F |
| Cover/Compensation Ring/Plate Required | No |
| Housing Bore Dia. | 6.25 in |
| Overall Width | 0.5 in |
| Design | CRWH1 |
| Surface Speed [Nom] | 3,600 ft/min |
| Installation | Housing Press Fit |
| Lip Type | Single Lip |
| Operating Temperature [Max] | 302 °F |
| Solid | Yes |
| Lubricant | Oil or Grease |
| Pressure | 10 psi |
| Seal Application | General Purpose |
| Lip Material | Polyacrylate Elastomer (ACM) |
| Spring Material | Carbon Steel Garter |
| Speed | 0.07 ft/min |
| Case Design | Metal Case, Inner Case |
| Construction | CRWH1 |
| Seal Type | Oil |
| Seal Design | SKF Wave |
| Lip Style | Internal |
| Temperature Range [Min] | -40 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Weight | 0.513 LB |
| EAN or UPC | 85311037365 |
