Find a Service Center
- 0.5 in Shaft Diameter
- 1.01 in Housing Bore Diameter
- 0.2 in Overall Width
- Fluoro Rubber (FKM) Lip Material
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. The seals have an outer covering of steel or elastomer, designed to fit the housing bore. The sealing lip is made of elastomer or thermoplastic for best sealing against the rotating shaft. A garter spring in the seal optimizes the sealing against the shaft.
features
- Many variants
- Easy installation
| Inch/Metric | Metric |
| Design | HMSA7 |
| Case Design | Rubber Outside Diameter |
| Pressure | 7 psi |
| Surface Speed [Nom] | 3,600 ft/min |
| Case Construction | Rubber Covered Steel Case |
| Lip Style | Internal |
| Installation | Housing Press Fit |
| Temperature Range [Min] | -40 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Seal Design | Molded Design |
| Shaft Dia. | 0.5 in, 12.7 mm |
| Overall Width | 0.2 in, 5.18 mm |
| Spring Material | Carbon Steel Garter |
| Speed | 0.05 ft/min |
| Temperature Range [Max] | 400 °F |
| Construction | HMSA7 |
| Lip Material | Fluoro Rubber (FKM) |
| Operating Temperature [Min] | -5 °F |
| Lip Type | Dual Lip |
| Lubricant | Oil or Grease |
| Operating Temperature [Max] | 390 °F |
| Seal Application | Light Dirt Exclusion |
| Housing Bore Dia. | 1.01 in, 25.65 mm |
| Weight | 0.101 LB |
| EAN or UPC | 85311194358 |
