Find a Service Center
- 0.5 in Shaft Diameter
- 1.124 in Housing Bore
- 0.313 in Overall Width
- Polyacrylate Elastomer (ACM) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Seal Application | General Purpose |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Temperature Range [Max] | 300 °F |
| Inch/Metric | Inch |
| Temperature Range [Min] | -40 °F |
| Cover/Compensation Ring/Plate Required | No |
| Seal Design | SKF Wave |
| Operating Temperature [Max] | 302 °F |
| Design | CRW1 |
| Shaft Dia. | 0.5 in |
| Case Construction | Steel Case w/o Inner Case |
| Lip Material | Polyacrylate Elastomer (ACM) |
| Pressure | 10 psi |
| Overall Width | 0.313 in |
| Solid | Yes |
| Construction | CRW1 |
| Speed | 0.07 ft/min |
| Spring Material | Carbon Steel Garter |
| Case Design | Metal Case |
| Seal Type | Oil |
| Lip Style | Internal |
| Operating Temperature [Min] | -40 °F |
| Lip Type | Single Lip |
| Lubricant | Oil or Grease |
| Housing Bore Dia. | 1.124 in |
| Installation | Housing Press Fit |
| Weight | 0.065 LB |
| EAN or UPC | 85311003490 |
