Find a Service Center
- 0.5 in Shaft Diameter
- 1.124 in Housing Bore
- 0.25 in Overall Width
- Fluorocarbon Rubber (FKM) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Surface Speed [Nom] | 590 ft/min |
| Lubricant | Oil or Grease |
| Case Construction | Steel Case w/o Inner Case |
| Shaft Dia. | 0.5 in |
| Construction | CRW1 |
| Spring Type | Garter |
| Inch/Metric | Inch |
| Lip Material | Fluorocarbon Rubber (FKM) |
| Pressure | 10 psi |
| Spring Material | Carbon Steel |
| Overall Width | 0.25 in |
| Cover/Compensation Ring/Plate Required | No |
| Seal Type | Oil |
| Housing Bore Dia. | 1.124 in |
| Seal Application | General Purpose |
| Case Material | Steel |
| Seal Design | SKF Wave |
| Case Design | Metal Case |
| Temperature Range [Min] | -40 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Speed | 0.07 ft/min |
| Operating Temperature [Min] | -5 °F |
| Operating Temperature [Max] | 390 °F |
| Temperature Range [Max] | 400 °F |
| Lip Type | Single Lip |
| Installation | Housing Press Fit |
| Lip Style | Internal |
| Design | CRW1 |
| Solid | Yes |
| Bore Sealant | Bore Tite |
| Weight | 0.066 LB |
| EAN or UPC | 85311003513 |
