Find a Service Center
- 5.25 in Shaft Diameter
- 6 in Housing Bore Diameter
- 0.5 in Overall Width
- Fluoro Rubber (FKM) Lip Material
- Inch
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Lip Style | Internal |
| Operating Temperature [Max] | 390 °F |
| Construction | CRWH1 |
| Case Construction | Steel Case w/Inner Case |
| Shaft Dia. | 5.25 in |
| Seal Application | General Purpose |
| Operating Temperature [Min] | -5 °F |
| Design | CRWH1 |
| Lip Material | Fluorocarbon Rubber (FKM) |
| Cover/Compensation Ring/Plate Required | No |
| Housing Bore Dia. | 6.001 in |
| Surface Speed [Nom] | 3,600 ft/min |
| Overall Width | 0.5 in |
| Bore Sealant | Bore Tite |
| Case Design | Metal Case, Inner Case |
| Temperature Range [Max] | 400 °F |
| Pressure | 10 psi |
| Solid | Yes |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Lubricant | Oil or Grease |
| Spring Type | Garter |
| Lip Type | Single Lip |
| Speed | 0.07 ft/min |
| Case Material | Steel |
| Seal Design | SKF Wave |
| Installation | Housing Press Fit |
| Temperature Range [Min] | -40 °F |
| Seal Type | Oil |
| Inch/Metric | Inch |
| Spring Material | Carbon Steel |
| Weight | 0.549 LB |
| EAN or UPC | 85311037761 |
