Find a Service Center
- 5.25 in Shaft Diameter
- 6.25 in Housing Bore Diameter
- 0.5 in Overall Width
- Fluoro Rubber (FKM) Lip Material
- Inch
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Pressure | 10 psi |
| Lip Style | Internal |
| Temperature Range [Max] | 400 °F |
| Seal Design | SKF Wave |
| Inch/Metric | Inch |
| Temperature Range [Min] | -40 °F |
| Speed | 0.07 ft/min |
| Operating Temperature [Max] | 390 °F |
| Seal Application | General Purpose |
| Lip Material | Fluorocarbon Rubber (FKM) |
| Case Design | Metal Case, Inner Case |
| Case Material | Steel |
| Construction | CRWH1 |
| Seal Type | Oil |
| Design | CRWH1 |
| Housing Bore Dia. | 6.25 in |
| Case Construction | Steel Case w/Inner Case |
| Operating Temperature [Min] | -5 °F |
| Cover/Compensation Ring/Plate Required | No |
| Bore Sealant | Bore Tite |
| Spring Type | Garter |
| Spring Material | Carbon Steel |
| Installation | Housing Press Fit |
| Lip Type | Single Lip |
| Solid | Yes |
| Lubricant | Oil or Grease |
| Overall Width | 0.5 in |
| Shaft Dia. | 5.25 in |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Weight | 0.458 LB |
| EAN or UPC | 85311037785 |
