Find a Service Center
- 0.5 in Shaft Diameter
- 1.25 in Housing Bore
- 0.25 in Overall Width
- Fluorocarbon Rubber (FKM) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Installation | Housing Press Fit |
| Seal Application | General Purpose |
| Seal Design | SKF Wave |
| Overall Width | 0.25 in |
| Lubricant | Oil or Grease |
| Spring Material | Carbon Steel Garter |
| Inch/Metric | Inch |
| Speed | 0.07 ft/min |
| Temperature Range [Min] | -40 °F |
| Seal Type | Oil |
| Design | CRW1 |
| Lip Material | Fluorocarbon Rubber (FKM) |
| Solid | Yes |
| Lip Style | Internal |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Case Design | Metal Case |
| Surface Speed [Nom] | 1,179 ft/min |
| Lip Type | Single Lip |
| Housing Bore Dia. | 1.25 in |
| Construction | CRW1 |
| Shaft Dia. | 0.5 in |
| Temperature Range [Max] | 400 °F |
| Operating Temperature [Max] | 390 °F |
| Cover/Compensation Ring/Plate Required | No |
| Case Construction | Steel Case w/o Inner Case |
| Operating Temperature [Min] | -5 °F |
| Pressure | 10 psi |
| Weight | 0.078 LB |
| EAN or UPC | 85311286756 |
