Find a Service Center
- 5.5 in Shaft Diameter
- 6.5 in Housing Bore Diameter
- 0.5 in Overall Width
- Fluoro Rubber (FKM) Lip Material
- Inch
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Installation | Housing Press Fit |
| Housing Bore Dia. | 6.5 in |
| Operating Temperature [Min] | -5 °F |
| Construction | CRWH1 |
| Spring Type | Garter |
| Speed | 0.07 ft/min |
| Spring Material | Carbon Steel |
| Overall Width | 0.5 in |
| Case Construction | Steel Case w/Inner Case |
| Lip Style | Internal |
| Inch/Metric | Inch |
| Surface Speed [Nom] | 3,600 ft/min |
| Shaft Dia. | 5.5 in |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Lip Material | Fluorocarbon Rubber (FKM) |
| Lip Type | Single Lip |
| Bore Sealant | Bore Tite |
| Temperature Range [Min] | -40 °F |
| Design | CRWH1 |
| Case Design | Metal Case, Inner Case |
| Temperature Range [Max] | 400 °F |
| Seal Type | Oil |
| Cover/Compensation Ring/Plate Required | No |
| Case Material | Steel |
| Lubricant | Oil or Grease |
| Seal Design | SKF Wave |
| Solid | Yes |
| Pressure | 10 psi |
| Operating Temperature [Max] | 390 °F |
| Seal Application | General Purpose |
| Weight | 0.473 LB |
| EAN or UPC | 85311038102 |
