Find a Service Center
Alternate Products
- 5.75 in Shaft Diameter
- 6.63 in Housing Bore Diameter
- 0.5 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- Inch
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Surface Speed [Nom] | 3,600 ft/min |
| Bore Sealant | Bore Tite |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Overall Width | 0.5 in |
| Construction | CRWH1 |
| Case Design | Metal Case, Inner Case |
| Inch/Metric | Inch |
| Spring Material | Carbon Steel |
| Lubricant | Oil or Grease |
| Spring Type | Garter |
| Temperature Range [Min] | -40 °F |
| Case Construction | Steel Case w/Inner Case |
| Lip Style | Internal |
| Operating Temperature [Max] | 210 °F |
| Speed | 0.07 ft/min |
| Installation | Housing Press Fit |
| Case Material | Steel |
| Operating Temperature [Min] | -40 °F |
| Temperature Range [Max] | 225 °F |
| Shaft Dia. | 5.75 in |
| Lip Type | Single Lip |
| Solid | Yes |
| Seal Application | General Purpose |
| Seal Type | Oil |
| Lip Material | Nitrile Rubber (NBR) |
| Seal Design | SKF Wave |
| Housing Bore Dia. | 6.625 in |
| Pressure | 10 psi |
| Design | CRWH1 |
| Cover/Compensation Ring/Plate Required | No |
| Weight | 0.49 LB |
| EAN or UPC | 85311038478 |
