Find a Service Center
- 5.75 in Shaft Diameter
- 6.75 in Housing Bore Diameter
- 0.5 in Overall Width
- Fluoro Rubber (FKM) Lip Material
- Inch
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Case Material | Steel |
| Overall Width | 0.5 in |
| Lubricant | Oil or Grease |
| Inch/Metric | Inch |
| Spring Type | Garter |
| Installation | Housing Press Fit |
| Seal Design | SKF Wave |
| Seal Application | General Purpose |
| Cover/Compensation Ring/Plate Required | No |
| Seal Type | Oil |
| Pressure | 10 psi |
| Temperature Range [Min] | -40 °F |
| Housing Bore Dia. | 6.75 in |
| Lip Material | Fluorocarbon Rubber (FKM) |
| Spring Material | Carbon Steel |
| Shaft Dia. | 5.75 in |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Operating Temperature [Min] | -5 °F |
| Solid | Yes |
| Speed | 0.07 ft/min |
| Temperature Range [Max] | 400 °F |
| Design | CRWH1 |
| Case Construction | Steel Case w/Inner Case |
| Operating Temperature [Max] | 390 °F |
| Lip Style | Internal |
| Bore Sealant | Bore Tite |
| Construction | CRWH1 |
| Case Design | Metal Case, Inner Case |
| Lip Type | Single Lip |
| Weight | 0.772 LB |
| EAN or UPC | 85311038522 |
