Find a Service Center
Alternate Products
- 5.88 in Shaft Diameter
- 7.5 in Housing Bore Diameter
- 0.5 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- Inch
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Seal Design | SKF Wave |
| Overall Width | 0.5 in |
| Bore Sealant | Bore Tite |
| Lip Material | Nitrile Rubber (NBR) |
| Housing Bore Dia. | 7.5 in |
| Operating Temperature [Max] | 210 °F |
| Case Design | Metal Case, Inner Case |
| Construction | CRWH1 |
| Operating Temperature [Min] | -40 °F |
| Temperature Range [Min] | -40 °F |
| Temperature Range [Max] | 225 °F |
| Design | CRWH1 |
| Spring Type | Garter |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Solid | Yes |
| Installation | Housing Press Fit |
| Pressure | 10 psi |
| Cover/Compensation Ring/Plate Required | No |
| Lip Type | Single Lip |
| Lip Style | Internal |
| Spring Material | Carbon Steel |
| Seal Type | Oil |
| Surface Speed [Nom] | 3,600 ft/min |
| Shaft Dia. | 5.875 in |
| Seal Application | General Purpose |
| Inch/Metric | Inch |
| Speed | 0.07 ft/min |
| Case Material | Steel |
| Lubricant | Oil or Grease |
| Case Construction | Steel Case w/Inner Case |
| Weight | 0.745 LB |
| EAN or UPC | 85311038676 |
