Find a Service Center
- 6.13 in Shaft Diameter
- 7.63 in Housing Bore Diameter
- 0.63 in Overall Width
- Polyacrylate Elastomer (ACM) Lip Material
- Inch
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Temperature Range [Max] | 300 °F |
| Operating Temperature [Max] | 302 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Seal Application | General Purpose |
| Construction | CRWH1 |
| Spring Material | Carbon Steel |
| Operating Temperature [Min] | -40 °F |
| Inch/Metric | Inch |
| Temperature Range [Min] | -40 °F |
| Cover/Compensation Ring/Plate Required | No |
| Surface Speed [Nom] | 3,600 ft/min |
| Installation | Housing Press Fit |
| Overall Width | 0.625 in |
| Seal Type | Oil |
| Lip Type | Single Lip |
| Case Design | Metal Case, Inner Case |
| Lip Style | Internal |
| Shaft Dia. | 6.125 in |
| Pressure | 10 psi |
| Seal Design | SKF Wave |
| Speed | 0.07 ft/min |
| Case Material | Steel |
| Housing Bore Dia. | 7.625 in |
| Solid | Yes |
| Case Construction | Steel Case w/Inner Case |
| Lip Material | Polyacrylate Elastomer (ACM) |
| Design | CRWH1 |
| Spring Type | Garter |
| Lubricant | Oil or Grease |
| Weight | 0.78 LB |
| EAN or UPC | 85311038935 |
