Find a Service Center
- 0.625 in Shaft Diameter
- 1.063 in Housing Bore
- 0.25 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Operating Temperature [Max] | 210 °F |
| Lip Type | Single Lip |
| Construction | CRW1 |
| Seal Design | SKF Wave |
| Lip Style | Internal |
| Solid | Yes |
| Spring Type | Garter |
| Case Material | Steel |
| Case Construction | Steel Case w/o Inner Case |
| Inch/Metric | Inch |
| Housing Bore Dia. | 1.063 in |
| Operating Temperature [Min] | -40 °F |
| Overall Width | 0.25 in |
| Seal Type | Oil |
| Shaft Dia. | 0.625 in |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Pressure | 10 psi |
| Lip Material | Nitrile Rubber (NBR) |
| Lubricant | Oil or Grease |
| Temperature Range [Max] | 225 °F |
| Seal Application | General Purpose |
| Surface Speed [Nom] | 737 ft/min |
| Speed | 0.07 ft/min |
| Temperature Range [Min] | -65 °F |
| Installation | Housing Press Fit |
| Spring Material | Carbon Steel |
| Design | CRW1 |
| Bore Sealant | Bore Tite |
| Cover/Compensation Ring/Plate Required | No |
| Case Design | Metal Case |
| Weight | 0.064 LB |
| EAN or UPC | 85311004299 |
