Find a Service Center
- 6 in Shaft Diameter
- 7 in Housing Bore Diameter
- 8 mm Overall Width
- Nitrile Rubber (NBR) Lip Material
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. The seals have an outer covering of steel or elastomer, designed to fit the housing bore. The sealing lip is made of elastomer or thermoplastic for best sealing against the rotating shaft. A garter spring in the seal optimizes the sealing against the shaft.
features
- Many variants
- Easy installation
| Spring Material | Carbon Steel Garter |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.005@2000, 0.005-0.010 |
| Seal Application | Dirt Exclusion |
| Lip Material | Nitrile Rubber (NBR) |
| Speed | 0.02 ft/min |
| Design | X15 |
| Shaft Dia. | 6 in, 158 mm |
| Lip Type | Triple Lip |
| Case Design | Metal Case |
| Lubricant | Grease |
| Temperature Range [Max] | 250 °F |
| Seal Design | Assembled Design |
| Housing Bore Dia. | 7 in, 196 mm |
| Case Construction | Steel Case w/Inner Case |
| Operating Temperature [Max] | 210 °F |
| Installation | Shaft Press Fit |
| Operating Temperature [Min] | -40 °F |
| Inch/Metric | Metric |
| Temperature Range [Min] | -40 °F |
| Lip Style | External |
| Pressure | 3 psi |
| Overall Width | 8 mm |
| Construction | X |
| Weight | 0.854 LB |
| EAN or UPC | 85311039031 |
