Find a Service Center
Alternate Products
- 6.63 in Shaft Diameter
- 8.13 in Housing Bore Diameter
- 0.5 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- Inch
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Construction | CRWH1 |
| Pressure | 10 psi |
| Operating Temperature [Max] | 210 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Cover/Compensation Ring/Plate Required | No |
| Housing Bore Dia. | 8.125 in |
| Seal Design | SKF Wave |
| Speed | 0.07 ft/min |
| Lip Type | Single Lip |
| Installation | Housing Press Fit |
| Lip Material | Nitrile Rubber (NBR) |
| Temperature Range [Min] | -40 °F |
| Overall Width | 0.5 in |
| Seal Type | Oil |
| Case Material | Steel |
| Shaft Dia. | 6.625 in |
| Spring Material | Carbon Steel |
| Operating Temperature [Min] | -40 °F |
| Lubricant | Oil or Grease |
| Design | CRWH1 |
| Surface Speed [Nom] | 3,600 ft/min |
| Seal Application | General Purpose |
| Solid | Yes |
| Spring Type | Garter |
| Case Design | Metal Case, Inner Case |
| Temperature Range [Max] | 225 °F |
| Inch/Metric | Inch |
| Case Construction | Steel Case w/Inner Case |
| Lip Style | Internal |
| Weight | 0.76 LB |
| EAN or UPC | 85311039321 |
