Find a Service Center
- 0.688 in Shaft Diameter
- 1.124 in Housing Bore
- 0.25 in Overall Width
- Fluorocarbon Rubber (FKM) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Speed | 0.07 ft/min |
| Inch/Metric | Inch |
| Housing Bore Dia. | 1.124 in |
| Construction | CRW1 |
| Temperature Range [Max] | 400 °F |
| Spring Type | Garter |
| Temperature Range [Min] | -40 °F |
| Spring Material | Stainless Steel |
| Lip Material | Fluorocarbon Rubber (FKM) |
| Shaft Dia. | 0.688 in |
| Lubricant | Oil or Grease |
| Seal Application | General Purpose |
| Case Construction | Steel Case w/o Inner Case |
| Design | CRW1 |
| Case Design | Metal Case |
| Case Material | Steel |
| Seal Type | Oil |
| Operating Temperature [Min] | -5 °F |
| Lip Type | Single Lip |
| Cover/Compensation Ring/Plate Required | No |
| Lip Style | Internal |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Surface Speed [Nom] | 811 ft/min |
| Installation | Housing Press Fit |
| Operating Temperature [Max] | 390 °F |
| Seal Design | SKF Wave |
| Bore Sealant | Bore Tite |
| Solid | Yes |
| Overall Width | 0.25 in |
| Pressure | 10 psi |
| Weight | 0.064 LB |
| EAN or UPC | 85311005043 |
