- 0.688 in Shaft Diameter
- 1.25 in Housing Bore
- 0.313 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Case Construction | Steel Case w/o Inner Case |
| Operating Temperature [Max] | 210 °F |
| Solid | Yes |
| Spring Type | Garter |
| Operating Temperature [Min] | -40 °F |
| Inch/Metric | Inch |
| Housing Bore Dia. | 1.25 in |
| Overall Width | 0.313 in |
| Lip Material | Nitrile Rubber (NBR) |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Surface Speed [Nom] | 811 ft/min |
| Construction | CRW1 |
| Temperature Range [Min] | -65 °F |
| Bore Sealant | Bore Tite |
| Design | CRW1 |
| Spring Material | Carbon Steel |
| Lip Type | Single Lip |
| Speed | 0.07 ft/min |
| Seal Application | General Purpose |
| Seal Design | SKF Wave |
| Installation | Housing Press Fit |
| Cover/Compensation Ring/Plate Required | No |
| Lubricant | Oil or Grease |
| Case Material | Steel |
| Temperature Range [Max] | 225 °F |
| Case Design | Metal Case |
| Pressure | 10 psi |
| Shaft Dia. | 0.688 in |
| Seal Type | Oil |
| Lip Style | Internal |
| Weight | 0.068 LB |
| EAN or UPC | 85311005104 |

