Find a Service Center
Alternate Products
- 0.688 in Shaft Diameter
- 1.375 in Housing Bore
- 0.313 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Spring Material | Carbon Steel Garter |
| Seal Design | SKF Wave |
| Case Construction | Steel Case w/o Inner Case |
| Solid | Yes |
| Pressure | 10 psi |
| Inch/Metric | Inch |
| Cover/Compensation Ring/Plate Required | No |
| Construction | CRW1 |
| Installation | Housing Press Fit |
| Temperature Range [Max] | 225 °F |
| Surface Speed [Nom] | 811 ft/min |
| Overall Width | 0.313 in |
| Lip Style | Internal |
| Temperature Range [Min] | -65 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Lubricant | Oil or Grease |
| Case Design | Metal Case |
| Shaft Dia. | 0.688 in |
| Lip Type | Single Lip |
| Operating Temperature [Min] | -40 °F |
| Seal Type | Oil |
| Speed | 0.07 ft/min |
| Housing Bore Dia. | 1.375 in |
| Lip Material | Nitrile Rubber (NBR) |
| Operating Temperature [Max] | 210 °F |
| Seal Application | General Purpose |
| Design | CRW1 |
| Weight | 0.072 LB |
| EAN or UPC | 85311005159 |
