Find a Service Center
- 0.75 in Shaft Diameter
- 1.25 in Housing Bore
- 0.25 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Shaft Dia. | 0.75 in |
| Case Design | Metal Case |
| Solid | Yes |
| Spring Material | Stainless Steel |
| Housing Bore Dia. | 1.25 in |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Temperature Range [Min] | -65 °F |
| Spring Type | Garter |
| Installation | Housing Press Fit |
| Seal Design | SKF Wave |
| Inch/Metric | Inch |
| Case Construction | Stainless Steel Case w/o Inner Case |
| Operating Temperature [Max] | 210 °F |
| Operating Temperature [Min] | -40 °F |
| Pressure | 10 psi |
| Seal Application | General Purpose |
| Construction | CRW1 |
| Lip Style | Internal |
| Case Material | Steel |
| Temperature Range [Max] | 225 °F |
| Seal Type | Oil |
| Cover/Compensation Ring/Plate Required | No |
| Lip Material | Nitrile Rubber (NBR) |
| Lip Type | Single Lip |
| Speed | 0.07 ft/min |
| Surface Speed [Nom] | 884 ft/min |
| Lubricant | Oil or Grease |
| Design | CRW1 |
| Bore Sealant | Bore Tite |
| Overall Width | 0.25 in |
| Weight | 0.054 LB |
| EAN or UPC | 85311005562 |
