Find a Service Center
- 0.75 in Shaft Diameter
- 1.26 in Housing Bore
- 0.25 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Speed | 0.07 ft/min |
| Case Design | Metal Case |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Cover/Compensation Ring/Plate Required | No |
| Temperature Range [Max] | 225 °F |
| Seal Type | Oil |
| Surface Speed [Nom] | 884 ft/min |
| Design | CRW1 |
| Lip Style | Internal |
| Lip Material | Nitrile Rubber (NBR) |
| Spring Material | Carbon Steel |
| Operating Temperature [Min] | -40 °F |
| Lip Type | Single Lip |
| Spring Type | Garter |
| Temperature Range [Min] | -65 °F |
| Case Construction | Steel Case w/o Inner Case |
| Lubricant | Oil or Grease |
| Inch/Metric | Inch |
| Housing Bore Dia. | 1.26 in |
| Bore Sealant | Bore Tite |
| Solid | Yes |
| Shaft Dia. | 0.75 in |
| Operating Temperature [Max] | 210 °F |
| Case Material | Steel |
| Seal Application | General Purpose |
| Seal Design | SKF Wave |
| Construction | CRW1 |
| Overall Width | 0.25 in |
| Pressure | 10 psi |
| Installation | Housing Press Fit |
| Weight | 0.066 LB |
| EAN or UPC | 85311005685 |
