Find a Service Center
- 0.75 in Shaft Diameter
- 1.624 in Housing Bore
- 0.25 in Overall Width
- Fluorocarbon Rubber (FKM) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Temperature Range [Max] | 400 °F |
| Overall Width | 0.25 in |
| Case Design | Metal Case |
| Case Construction | Steel Case w/o Inner Case |
| Shaft Dia. | 0.75 in |
| Lip Type | Single Lip |
| Lip Material | Fluorocarbon Rubber (FKM) |
| Operating Temperature [Min] | -5 °F |
| Cover/Compensation Ring/Plate Required | No |
| Construction | CRW1 |
| Installation | Housing Press Fit |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Lip Style | Internal |
| Case Material | Steel |
| Lubricant | Oil or Grease |
| Temperature Range [Min] | -40 °F |
| Housing Bore Dia. | 1.624 in |
| Operating Temperature [Max] | 390 °F |
| Design | CRW1 |
| Seal Application | General Purpose |
| Seal Design | SKF Wave |
| Bore Sealant | Bore Tite |
| Spring Type | Garter |
| Seal Type | Oil |
| Surface Speed [Nom] | 884 ft/min |
| Solid | Yes |
| Spring Material | Stainless Steel |
| Inch/Metric | Inch |
| Speed | 0.07 ft/min |
| Pressure | 10 psi |
| Weight | 0.077 LB |
| EAN or UPC | 85311005913 |
