Find a Service Center
Alternate Products
- 0.75 in Shaft Diameter
- 1.828 in Housing Bore
- 0.25 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Speed | 0.07 ft/min |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Design | CRW1 |
| Seal Type | Oil |
| Installation | Housing Press Fit |
| Spring Material | Carbon Steel |
| Overall Width | 0.25 in |
| Operating Temperature [Max] | 210 °F |
| Case Construction | Steel Case w/o Inner Case |
| Housing Bore Dia. | 1.828 in |
| Lip Material | Nitrile Rubber (NBR) |
| Construction | CRW1 |
| Bore Sealant | Bore Tite |
| Temperature Range [Max] | 225 °F |
| Case Design | Metal Case |
| Cover/Compensation Ring/Plate Required | No |
| Lubricant | Oil or Grease |
| Temperature Range [Min] | -65 °F |
| Solid | Yes |
| Surface Speed [Nom] | 884 ft/min |
| Spring Type | Garter |
| Lip Type | Single Lip |
| Lip Style | Internal |
| Inch/Metric | Inch |
| Case Material | Steel |
| Seal Design | SKF Wave |
| Pressure | 10 psi |
| Operating Temperature [Min] | -40 °F |
| Shaft Dia. | 0.75 in |
| Seal Application | General Purpose |
| Weight | 0.082 LB |
| EAN or UPC | 85311005975 |
