Find a Service Center
- Radial Shaft Seal
- 80 mm Shaft Diameter
- 120 mm Housing Bore Diameter
- 13 mm Width
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. The seals have an outer covering of steel or elastomer, designed to fit the housing bore. The sealing lip is made of elastomer or thermoplastic for best sealing against the rotating shaft. A garter spring in the seal optimizes the sealing against the shaft.
features
- Many variants
- Easy installation
| Temperature Range [Max] | 230 °F |
| Seal Design | Standard |
| Seal Type | Grease |
| Surface Speed [Nom] | 3,600 ft/min |
| Lip Material | Nitrile Rubber (NBR) |
| Pressure | 10 psi |
| Cover/Compensation Ring/Plate Required | No |
| Construction | HMS4 |
| Temperature Range [Min] | -22 °F |
| Lip Type | Single Lip w/Spring |
| Seal Application | General Purpose |
| Case Construction | Rubber Covered Steel Case |
| Housing Bore Dia. | 120 mm |
| Shaft Dia. | 80 mm |
| Inch/Metric | Metric |
| Spring Material | Carbon Steel Garter |
| Overall Width | 13 mm |
| Lip Style | Internal |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@1000-3600 |
| Weight | 0.457 LB |
| EAN or UPC | 85311901475 |
