Find a Service Center
Alternate Products
Timken Co.
455475
8.250" Shaft Diameter; 9.250" Housing Bore Diameter; .625" Width; Nitrile; Type45; Single Lip w/Spring Shaft Seal
Item #101096705
- 8.25 in Shaft Diameter
- 9.25 in Housing Bore Diameter
- 0.63 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- Inch
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Temperature Range [Min] | -40 °F |
| Construction | CRWH1 |
| Operating Temperature [Max] | 210 °F |
| Installation | Housing Press Fit |
| Seal Application | General Purpose |
| Cover/Compensation Ring/Plate Required | No |
| Lip Style | Internal |
| Case Design | Metal Case, Inner Case |
| Surface Speed [Nom] | 3,600 ft/min |
| Operating Temperature [Min] | -40 °F |
| Case Material | Steel |
| Spring Material | Carbon Steel |
| Seal Type | Oil |
| Seal Design | SKF Wave |
| Lubricant | Oil or Grease |
| Overall Width | 0.625 in |
| Solid | Yes |
| Pressure | 10 psi |
| Lip Type | Single Lip |
| Lip Material | Nitrile Rubber (NBR) |
| Speed | 0.07 ft/min |
| Design | CRWH1 |
| Shaft Dia. | 8.25 in |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Housing Bore Dia. | 9.25 in |
| Material | Alloy Steel |
| Inch/Metric | Inch |
| Spring Type | Garter |
| Temperature Range [Max] | 225 °F |
| Case Construction | Steel Case w/Inner Case |
| Bit Length | 5.393 in |
| Nose Diameter | 0.508 in |
| Magnetic | No |
| Tip Type | Torx® |
| Finish | Full Polish Chrome Holder with Black Oxide Bit |
| Drive End | 0.508 in |
| Exposed Bit Length | 5.105 in |
| Socket Drive Size | 1/4 in |
| Overall Length | 5.98 in |
| Socket Size | T8 |
| Weight | 1.1 LB |
| EAN or UPC | 85311040099 |
