Find a Service Center
- 8.25 in Shaft Diameter
- 10.25 in Housing Bore Diameter
- 0.75 in Overall Width
- Carboxylated Nitrile Rubber (XNBR) Lip Material
- Inch
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
features
- Extreme performance flexibility
- Innovative installation options
| Temperature Range [Max] | 250 °F |
| Shaft Dia. | 8.25 in, 209.55 mm |
| Lug Length | 0.5 in, 12.7 mm |
| Housing Bore Dia. | 10.25 in, 260.35 mm |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
| Lip Style | Internal |
| Seal Application | General Purpose |
| Cover/Compensation Ring/Plate Required | No |
| Lip Type | Single Lip |
| Operating Temperature [Min] | -40 °F |
| Pressure | 15 psi |
| Temperature Range [Min] | -40 °F |
| Case Construction | Steel Case w/Inner Case w/4 Adjustable Lugs |
| Case Design | Metal Case, Spacer Lugs |
| Overall Width | 0.75 in, 19.05 mm |
| Solid | Yes |
| Speed | 0.1 ft/min |
| Case Material | Steel |
| Operating Temperature [Max] | 210 °F |
| Lip Material | Carboxylated Nitrile Rubber (XNBR) |
| Material | Alloy Steel with S2 Steel Bit |
| Surface Speed [Nom] | 5,000 ft/min |
| Lubricant | Oil or Grease |
| Inch/Metric | Inch |
| Design | HDS3 |
| Spring Type | Garter Spring Cover |
| Spring Material | Stainless Steel |
| Seal Design | Assembled Design |
| Installation | Housing Press Fit |
| Construction | HDS3 |
| Finish | Full Polish Chrome Holder with Black Oxide Bit |
| Nose Diameter | 1.1 in |
| Bit Length | 2.87 in |
| Drive End | 1.1 in |
| Overall Length | 3.98 in |
| Weight | 3.595 LB |
| EAN or UPC | 85311087551 |
