Find a Service Center
Alternate Products
- 8 in Shaft Diameter
- 10 in Housing Bore Diameter
- 16 mm Overall Width
- Nitrile Rubber (NBR) Lip Material
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Construction | CRWH1 |
| Housing Bore Dia. | 10 in |
| Overall Width | 0.63 in |
| Solid | Yes |
| Seal Type | Oil |
| Spring Material | Carbon Steel Garter |
| Lip Style | Internal |
| Seal Design | SKF Wave |
| Operating Temperature [Max] | 210 °F |
| Cover/Compensation Ring/Plate Required | No |
| Shaft Dia. | 8.5 in |
| Installation | Housing Press Fit |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Case Construction | Steel Case w/Inner Case |
| Surface Speed [Nom] | 3,600 ft/min |
| Operating Temperature [Min] | -40 °F |
| Lubricant | Oil or Grease |
| Design | CRWH1 |
| Material | Alloy Steel |
| Temperature Range [Min] | -40 °F |
| Temperature Range [Max] | 225 °F |
| Lip Material | Nitrile Rubber (NBR) |
| Speed | 0.07 ft/min |
| Seal Application | General Purpose |
| Case Design | Metal Case, Inner Case |
| Inch/Metric | Inch |
| Pressure | 10 psi |
| Lip Type | Single Lip |
| No. of Points | 12 |
| Length Type | Extra Long |
| No. of Teeth | 72 |
| Overall Length | 6.5 in |
| Finish | Full Polish Chrome |
| Weight | 1.726 LB |
| EAN or UPC | 85311040211 |
